Shape determination for deformed electromagnetic cavities

The measured physical parameters of a superconducting cavity differ from those of the designed ideal cavity. This is due to shape deviations caused by both loose machine tolerances during fabrication and by the tuning process for the accelerating mode. We present a shape determination algorithm to solve for the unknown deviations from the ideal cavity using experimentally measured cavity data. The objective is to match the results of the deformed cavity model to experimental data through least-squares minimization. The inversion variables are unknown shape deformation parameters that describe perturbations of the ideal cavity. The constraint is the Maxwell eigenvalue problem. We solve the nonlinear optimization problem using a line-search based reduced space Gauss–Newton method where we compute shape sensitivities with a discrete adjoint approach. We present two shape determination examples, one from synthetic and the other from experimental data. The results demonstrate that the proposed algorithm is very effective in determining the deformed cavity shape.     

Green synthesis of silver nanoparticles by using eugenol and evaluation of antimicrobial potential

The importance of green synthesis was revealed with advantages such as: eliminating the use of expensive chemicals; consume less energy; and generate environmentally benign products. With this aim, silver nanoparticles (AgNPs) were synthesized by using isolated eugenol from clove extract. Its antimicrobial potential was determined on three different microorganisms. Clove was extracted and eugenol was isolated from this extract. Green synthesis was performed and an anti‐microbial study was performed. All extraction and isolation analyses were performed by high‐performance liquid chromatography (HPLC); identification and confirmation were achieved using liquid chromatography–mass spectrometry (LC–MS); and scanning electron microscopy was used for characterization. Both HPLC and LC–MS analyses showed that eugenol obtained purely synthesized AgNPs and 20‐25‐nm‐sized and homogeneous shaped particles seen in images. The antimicrobial effects of AgNPs at eight concentrations were determinated against Staphylococcus aureus, Escherichia coli and Candida albicans, and maximum inhibition zone diameters were found as 2.6 cm, 2.4 cm and 1.5 cm, respectively. The results of the antimicrobial study showed that eugenol as a biological material brought higher antimicrobial effect to AgNPs in comparison to the other materials found in the literature.     

Carbohydrates as Additives for the Formation of Isoporous PS‐b‐P4VP Diblock Copolymer Membranes

Highly porous polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) diblock copolymer membranes are prepared using carbohydrates as additives. Therefore α‐cyclodextrine, α‐(D )‐glucose, and saccharose (cane sugar) are tested for the membrane formation of three different PS‐b‐P4VP polymers. The addition of the carbohydrates leads to an increasing viscosity of the membrane solutions due to hydrogen bonding between hydroxyl groups of the carbohydrates and pyridine units of the block copolymer. In all cases, the membranes made from solution with carbohydrates have higher porosity, an improved narrow pore distribution on the surface and a higher water flux as membranes made without carbohydrates with the same polymer, solvent ratio, and polymer concentration.     

Naphthodioxinone‐1,3‐benzodioxole as photochemically masked one‐component type II photoinitiator for free radical polymerization

A 1,3‐benzodioxole derivative of naphthodioxinone, namely 2‐(benzo[d][1,3]dioxol‐5‐yl)‐9‐hydroxy‐2‐phenyl‐4H‐naphtho[2,3‐d][1,3]dioxin‐4‐one was synthesized and characterized. Its capability to act as caged one‐component Type II photoinitiator for free radical polymerization was examined. Upon irradiation, this photoinitiator releases 5‐benzoyl‐1,3‐benzodioxole possessing both benzophenone and 1,3‐dioxole groups in the structure as light absorbing and hydrogen donating sites, respectively. Subsequent photoexcitation of the benzophenone chromophore followed by hydrogen abstraction generates radicals capable of initiating free radical polymerization of appropriate monomers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Correlation of gas permeation and free volume in new and used high free volume thin film composite membranes

Polymeric gas separation membranes frequently undergo the phenomenon of aging, that is, performance parameters like permeability decrease with storage or usage time. Here, we report on a new approach of reducing aging by incorporation of functionalized multiwalled carbon nanotubes into a polymer of intrinsic microporosity. Free volume and permeability measurements clearly show a reduced aging with incorporation of the carbon nantubes. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 213–217     

K Shell and L Subshell Photoeffect Cross-Sections of Some Elements in the Atomic Range 50≤Z≤65 at 59.5 keV

In this study,K and L shell photoeffect cross-sections were measured for the elements in the range of 50≤Z≤65at 59.5keV.These photoeffect cross-sections were measured by using the experimentalσKαproduction cross-section values measured in this paper and two different K shell fluorescence yield values in the literature.The results were compared with the calculated theoretical values.The values were plotted versus atomic number.     

Analysis of glass transition and relaxation processes of low molecular weight polystyrene-b-polyisoprene diblock copolymers

The objective of this study is to analyze the glass transition temperature and relaxation processes of low molecular weight polystyrene-block-polyisoprene diblock copolymers with different compositions, synthesized via anionic polymerization. Thermal properties were investigated by differential scanning calorimetry and dynamic-mechanical thermal analysis, while the morphologies at room temperature were investigated by transmission electron microscopy and small-angle X-ray scattering. The χN values indicate that the diblock copolymers lie near the weak segregation regime. Three different experimental techniques were applied to determine the dynamic properties, i.e., linear viscoelastic shear oscillations, creep recovery experiments, and dielectric spectroscopy. The rheological experiments were performed above the order–disorder transition temperature where the diblock copolymers behave like a Maxwell fluid. Our results indicate that the presence of the polyisoprene segments strongly influences the monomeric friction coefficient and the tendency to form entanglements above the order–disorder temperature. Consequently, the zero-shear rate viscosity of a diblock copolymer is much lower than the zero-shear rate viscosity of the neat polystyrene block (the polystyrene precursor of the polymerization procedure). Dielectric spectroscopy enables the analysis of relaxation processes below the glass transition of the polystyrene microphase. Frequency sweeps indicate the dynamic glass transition of the polyisoprene blocks, which are partly mixed with the polystyrene blocks, which are always the majority component in the block copolymers of this study.     

Styrene‐vinyl pyridine diblock copolymers: Achieving high molecular weights by the combination of anionic and reversible addition–fragmentation chain transfer polymerizations

Anionic and reversible addition–fragmentation chain transfer (RAFT) polymerizations were combined for the preparation of high molecular weight (MW) amphiphilic diblock copolymers based on the hydrophobic styrene (Sty) and the more polar 2‐vinyl pyridine (2VPy) or 4‐vinyl pyridine (4VPy). In particular, four amphiphilic Sty‐VPy diblock copolymers with MWs up to 271,000 g mol^–1 were prepared. For the polymer synthesis, first, living anionic polymerization of Sty using sec‐butyl‐lithium as initiator in tetrahydrofuran at ?70 °C, followed by termination with ethylene oxide were employed for the preparation of OH‐functionalized homopolyStys. Subsequently, a modification of the OH‐terminal group was performed by the attachment of a 4‐cyanopentanoic acid dithiobenzoate chain transfer agent (CTA) group, giving a polySty macroRAFT CTA, which was extended with 2VPy or 4VPy units using RAFT polymerization. Thus, the prepared diblock copolymers comprised a first block which was near‐monodisperse in size, and a second more heterogeneous block. All diblock copolymers were characterized in terms of their MWs and compositions by gel permeation chromatography and ¹H NMR spectroscopy, respectively, giving results close to the theoretically expected values. Films cast from chloroform solutions of the diblock copolymers were investigated in terms of their bulk morphologies using transmission electron microscopy, which indicated that the minority block consistently formed the discontinuous microphase, spherical or cylindrical. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013